Panasonic TC-26LX60

Watt
m
|
Videos and DVDs
Some Panasonic equipments connected to the TV unit can be operated with the remote control.
Programming the remote control is necessary to operate other manufacturers' products. (p. 20, 36-38)
With VCR or DVD turned On
Switch to external input
Press to display the Input select menu.
TV/VlDEO
Select the input mode
®@@
@@@
®®@
®
(initial screen)
or
Press corresponding NUMBER
key on the Remote Control to
select the input of your choice.
select Press to select the input of your
choice, then press "OK".
® If during selection, no action
enter is taken for several seconds,
the Input selection menu is
exited.
®The terminal and label of the connected
equipment is indicated.
To label the each connected equipments (p. 13)
- Label Terminal
[example]
[] Press to return to TV
TVNIDEO
0
Operate
the VCR or DVD with the remote control
(example)
Note
@For details, see the
manual of the
equipment
or ask your local
dealer.
Rewind/Fast Forward
Play
Pause
Stop
VCR Record
TV/VCR
Channel Down/UP
(For other operations, see p. 36)
Reverse/Forward
Play
Pause
Stop
Open/Close
Slow Reverse/Forward
12