
Do you have a question about the Panasonic tc-l32e5 and is the answer not in the manual?
| Screen Size | 32 inches |
|---|---|
| Resolution | 1366 x 768 |
| Display Type | LCD |
| Backlight | LED |
| Refresh Rate | 60 Hz |
| HDMI Ports | 3 |
| USB Ports | 1 |
| Audio Output | 10W x 2 |
| Ethernet Port | Yes |
| Wi-Fi | Yes |
| Smart TV | No |
| Aspect Ratio | 16:9 |
| VGA Input | 1 |
| Component Input | 1 |
| Composite Input | 1 |
| Headphone Jack | 1 |
| Built-in Speakers | Yes |
| Speaker Output | 10W x 2 |
| VESA Mount Compatible | Yes |
| VESA Mount Pattern | 200 x 200 mm |
| Energy Efficiency Class | A |
| Standby Power Consumption | 0.3W |
| Digital Audio Output | Optical |
| Dimensions (W x H x D) without Stand | 73.5 x 43.1 x 6.5 cm |
General advice for safe servicing and procedures for cold/hot leakage current tests.
Guidelines for preventing electrostatic discharge and handling lead-free solder.
Identifies main circuit boards (A, P, K) and their primary functions.
Procedures for entering, exiting, and adjusting settings within the service mode.
Accessing and utilizing SRV-TOOL for diagnostics and operational data.
Procedures for self-check diagnostics and configuring Hotel Mode settings.
Procedure to check IIC bus lines and interpret power LED blinking patterns.
Troubleshooting steps for units that do not power on.
Steps for assembling speaker units and the main LCD panel.
Instructions for assembling LED panels, LVDS cables, and metal parts.
Procedures for installing AV brackets, key buttons, and the back cover.
Tables listing specified voltage ranges for A-board and P-board test points.
Overview and detailed breakdowns of system functional blocks and signal paths.
Explanation of symbols, units, and conventions used in schematic diagrams.
Comprehensive schematics for the A-board, detailing various interfaces and functions.
Schematic diagrams for the K-board and P-board, covering their respective circuits.
Top and bottom component layout and parts location for the A-board.
Component layout and parts location for the K-board (top and bottom).
Top and bottom component layout and parts location for the P-board.
Exploded views and lists for mechanical replacement parts.
Notes and comprehensive list of electrical replacement parts.












Loading...