TC-L32E5
18
7.6. LVDS & Barrier Assembly
1. Remove the double tape from the LVDS cables indicated by the pointed boxes (tapes must be stuck to the panel).
2. Connect the LVDS cables to the panel and stick them to the panel.
3. Align the cable A10-K10.
4. Assemble 4 clampers in the positions indicated.
5. Stick on a 110 mm piece of tape to hold the flexible cables.
No. Part Num. Quant. Description
1 TSCLF0010006 1 LVDS CABLE
2 TSCKF0010008 1 LVDS CABLE
3 TMME268 4 CLAMPER
4
0.11
PET TAPE ( 0.07 × 7)
To Next Page
Loading...
