TC-L32E5
26
7.14. Cable Alignment
1. Align the cables using the clampers with the help of the reference table below.
2. Put the tape in place to align the cables as indicated.
3. Connect the cables to their respective connector.
4. Connect the cable from the panel to plate P.
5. Stick the aluminium tapes in the position indicated.
No. Part Num. Quant. Description
1 TXJA02RVUU 1 CABLE ASSY (A02-P2)
2 TXJA12RVUU 1 CABLE ASSY (A12-SP)
3 0.16 PET TAPE (0.05 × 7)
3 TEWF091 2 ALUMINIUM+PET FILM (W15*L80)
Cables
Clampers / Tapes
ABCDE
P2 - A02
SP (R) - A12
SP (L) - A12
A10 - K10
To Next Page
Loading...
