Control ControJ"
Newer Panasonic audio-video products with HDMI output connections can be controlled using the TV's
remote. Limited features such as automatic switching to the TV's HDMI input are available.
@This feature is limited to models incorporating Panasonic's "Control with HDMI". Refer to the models listed on page
22 or the individual instruction manuals for compatibility information.
@Depending on the cable used, this function may not be possible.
When "Ctrl with HDMI" is set to "On", at the start of DIGA playback, TV input automatically
switches to the input compatible with playback equipment.
@If using DIGA operation and the DIGA menu is displayed, the TV input automatically
switches to DIGA. IfTV power is Off, it switches On.
When "Ctrl with HDMI" is set to "On", the TV is automatically turned on and switched to the
appropriate HDMI input whenever a "Control with HDMI" compatible DIGA (Panasonic DVD
Recorder) is initially turned on and Play mode is selected.
When "Ctrl with HDMI" is set to "On" and the TV is turned off, the connected DIGA (Panasonic
DVD Recorder) is also automatically turned off.
@DIGA (Panasonic DVD Recorder) will not turn off if it is still in rec mode.
@Before using HDMI control functions, the connected equipment (DIGA) must also be set. For details, see the
operation manual for each equipment.
@For equipment connection details, see p. 22.
@Default setting is "On". If no HDMI equipments are connected or standard HDMI (non- "Control with HDMI") are
used, set to "Off". (see below)
®
®oo
O3
_o
"O --
m<>
..Q --
B_
OQQ
® ®
@ @(
® @ (
Display menu
MENU
Select "Setup"
Menu
Select "Other adjust"
Other adjust
Select "Ctrl with HDMI"
Ctrl with HDMI
Select "On" or "Off"
[] Press to exit or return to previous screen
RETURN
EXIT
0
21
To Next Page
Loading...
