YoucanenjoyyourhometheaterbyconnectingaDolbyDigital(5.1channel)decoderand"MultiChannel"amplifier
totheDIGITALAUDIOOUTterminals.
@DependingonyourDVDplayerandDVD-Audiosoftwarethecopyrightprotectionfunctionmayoperateanddisable
opticaloutput.
@ExternalspeakerscannotbeconnecteddirectlytoOUTPUTterminals.
@WhenATSCchannelisselected,theoutputfromtheDIGITALAUDIOOUTjackwillbeDolbyDigital.WhenNTSC
channelisselected,theoutputwillbePCM.
HDMI connections to some Panasonic equipments allow you to enjoy easy playback.
® Setup the equipment to enable this function. Read the manual of the equipment.
® Switch the TV unit on again with the equipment on when connection or setup is changed.
® This function may not work normally depending on the equipment condition.
® The equipment can be operated by TV's remote control with this function on even if TV is in Standby mode.
® Image or sound may not be available for the first few seconds when the playback starts.
® Image or sound may not be available for the first few seconds when Input mode is switched.
® Volume function will be displayed when adjusting the volume of the equipment.
® Easy playback is also available by using the remote control for Amplifier. Read the manuals of Amplifier.
HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound by connecting
the TV unit and the equipments.
HDMI-compatible equipment ('1) with an HDMI or DVI output terminal, such as a set-top box or a DVD player, can be connected
to the HDMI connector using an HDMI compliant (fully wired) cable.
® HDMI is the world's first complete digital consumer AV interface complying with a non-compression standard.
® If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adapter cable (*2).
® When the DVl to HDMI adapter cable is used, connect the audio cable to the audio input terminal.
® Audio settings can be made on the "HDMI in" menu screen. (p. 14-15)
Applicable audio signal sampling frequencies (L.PCM):
48 kHz, 44.1 kHz, 32 kHz
('1): The HDMI logo is displayed on an HDMI-compliant equipment.
(*2): Enquire atyour localdigital equipment retailer shop.
® Use with a PC is not assumed.
® All signal is reformatted before being displayed on the screen.
® If the connected equipment has an aspect adjustment function, set the aspect ratio to "16:9".
® This HDMI connector is "type A".
® An equipment having no digital output terminal may be connected to the input terminal of either "COMPONENT", "S-VIDEO", or
"VIDEO" to receive analog signals.
® The HDMI input terminal can be used with only the following image signals: 480i, 480p, 720p and 1080i
Match the output setting of the digital equipment.
@ For details of the applicable HDMI signals, see below.
* Mark: Applicable input signal for Component (Y, PB, PR)and HDMI
O
C)
,,,,,-h
©
3
m,
©
t5.73 59.94
I, 125 (1,089) I69i 33.75 59.94
Note
® Signals other than above may not be displayed properly.
® The above signals are reformatted for optimal viewing on your display.
41
To Next Page
Loading...
