First Time Setup
"First time setup" is displayed only when the TV is turned on for the first time after the power cord is
inserted into a wall outlet and when "Auto power on" is set to "No".
Turn the TV On with the POWER button
POWER
* This setting willbe skipped next time if you select "Home Use".
O Select your language
select
_) Be sure to select "Home Use"
@ok
• Please confirm your selection (Home Use) before pressing OK button.
• If you select "Store Demonstration" by mistake in @, confirmatio_
screen will be displayed.
select
e Select "No" and return to previous screen @.
o If you select "Yes", Screen enters store demonstration mode.
To display the "Please select your viewing environment" screen again as
shown above and select "Home Use", do one of the following:
• Press and hold down the front POWER button.
• Unplug the TV and plug it again.
12
• Press to exit from
a menu screen
EXIT
• Press to return
to the previous
screen
RETURN
@
To Next Page
Loading...
