First Time Setup (Continued)
(_) Select scanning mode (ALLchannelslAnalogonlylDigitalonly)
Start scanning the channels
o Availablechannels(analog/digital)are automaticallyset.
All channels: Scans digital and analog channels
Analog only: Scans Analog channels only
Digital only: Scans Digital channels only
(_ Confirm registered channels
Qselect "Apply"
@ok
If OK is not pressed after selecting "Apply", the channels will not be saved.
The channel will be saved when no operation is performed for 60 seconds and
the "Manual program" menu will also exit automatically.
@ If you perform scanning more than twice, previously saved channels are erased.
Set the Input labels
- @next
Oselect
• Press to exit from
a menu screen
EXIT
(2N
About broadcasting
systems
Analog (NTSC):
Conventional
broadcasting
Digital (ATSC):
New
programming
that allows
you to view
more channels
featuring
high-quality video
and sound
,select
- @set
Switches Input mode alphabet to
numeric
Label: [BLANK] SKIP/VCR/DVD/CABLE/SATELLITE/DVR/GAMEIAUX/RECEIVER/
COMPUTER/Blu-ray/CAMERA/DVD REC/HOME THTR/MONITOR/MEDIA
CTR/MEDIA EXT/OTHER
14
To Next Page
Loading...
