Panasonic TC-L50ET60 - 3 D Settings

All settings
Picture
3D settings
MENU Menu > Picture > 3D settings
Auto detect 3D
(Off/Auto 1/Auto 2)
Auto 1: Switches to 3D display when 3D indication is available (HDMI (3D),
AVCHD file, etc.)
Auto 2: Same as Auto 1. Also detects 3D signal by identifying similar image in
side-by-side or top-and-bottom 3D formats.
Note: Choose 3D mode manually when auto detection is not available.
3D signal notification
(Off/On)
On: Displays a message according to the signal received by the Auto detect
3D.
2D 3D depth
(Minimum/Medium/Maximum)
Adjusts the simulated 3D depth perception effect of the 2D incoming signal.
3D adjustment
(Off/On)
Adjust the left eye versus right eye depth effect of the image. Set to On to
adjust Effect (-3 to +3).
Gray-out in 2D mode
Left/Right swap
(Normal/Swapped)
Flips the phase of the image to give the correct perception of depth.
Gray-out in 2D mode
Diagonal line filter
(Off/Mid/High)
Select when diagonal lines appear jagged. Turn off when the picture looks
noisy.
MENU Menu > Picture > 3D settings MENU Menu > Picture > 3D settingsMENUMENU Menu > Picture > 3D settingsMenu Picture 3D settings
Auto detect 3D
(Off/Auto 1/Auto 2)
Auto 1: Switches to 3D display when 3D indication is available (HDMI (3D),
AVCHD file, etc.)
Auto 2: Same as Auto 1. Also detects 3D signal by identifying similar image in
side-by-side or top-and-bottom 3D formats.
Note: Choose 3D mode manually when auto detection is not available.
Auto detect 3D
(Off/Auto 1/Auto 2)
Auto 1: Switches to 3D display when 3D indication is available (HDMI (3D),
AVCHD file, etc.)
Auto 2: Same as Auto 1. Also detects 3D signal by identifying similar image in
side-by-side or top-and-bottom 3D formats.
Note: Choose 3D mode manually when auto detection is not available.
Auto detect 3D
(Off/Auto 1/Auto 2)
Auto 1
Auto 2
3D signal notification
(Off/On)
On: Displays a message according to the signal received by the Auto detect
3D.
3D signal notification
(Off/On)
On: Displays a message according to the signal received by the Auto detect
3D.
3D signal notification
(Off/On)
On Auto detect
3D
Auto detect
3D
2D 3D depth
(Minimum/Medium/Maximum)
Adjusts the simulated 3D depth perception effect of the 2D incoming signal.
2D 3D depth
(Minimum/Medium/Maximum)
Adjusts the simulated 3D depth perception effect of the 2D incoming signal.
2D 3D depth
(Minimum/Medium/Maximum)
3D adjustment
(Off/On)
Adjust the left eye versus right eye depth effect of the image. Set to On to
adjust Effect (-3 to +3).
3D adjustment
(Off/On)
Adjust the left eye versus right eye depth effect of the image. Set to On to
adjust Effect (-3 to +3).
3D adjustment
(Off/On)
On
EffectEffect -3 +3
Gray-out in 2D modeGray-out in 2D mode
Left/Right swap
(Normal/Swapped)
Flips the phase of the image to give the correct perception of depth.
Left/Right swap
(Normal/Swapped)
Flips the phase of the image to give the correct perception of depth.
Left/Right swap
(Normal/Swapped)
Gray-out in 2D modeGray-out in 2D mode
Diagonal line filter
(Off/Mid/High)
Select when diagonal lines appear jagged. Turn off when the picture looks
noisy.
Diagonal line filter
(Off/Mid/High)
Select when diagonal lines appear jagged. Turn off when the picture looks
noisy.
Diagonal line filter
(Off/Mid/High)
148 (0600205)