20
8.2.9. GK-Board
1. Disconnect the connector (GK4).
2. Remove the 1 screw.
3. Remove the GK-Board.
4. Remove the locking tab.
5. Remove the GK-Board and the Key Button Bracket.
8.2.10. K-Board
1. Remove the LED panel assy.
2. Disconnect the connector (K10).
3. Remove the K-Board.
8.2.11. Bluetooth Dongle
1. Disconnect the connector.
2. Remove the BT-Dongle.
8.2.12. Woofer
1. Remove the 3 screws.
2. Remove the Woofer.
3. Remove the 5 screws.
4. Remove the Metal Bracket Woofer R & L .
To Next Page
Loading...
