Panasonic TC-P54V10

18
7 Disassembly and Assembly Instructions
7.1. Remove the Rear cover and the
Bottom plate
1. See Service Hint (Section 3)
7.2. Remove the P-Board
Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable
2. Disconnect the connectors (P51-P52, P53-P54, P55-P56
and P57-P58).
3. Disconnect the connectors (P2, P6, P7, P9, P11, P25 and
P35).
4. Remove the screws (×9 ) and remove the
P(P-1)-Board.
5. Remove the screws (×6 ) and remove the
P(P-2)-Board.
7.3. Remove the Side terminal
cover and Rear terminal cover
1. Remove the claw (×1 ).
2. Remove the Side terminal cover.
3. Remove the Adjustment cover.
4. Remove the screws (×4 , ×4 , ×1 ).
5. Remove the Rear terminal cover.