Panasonic TC-P60GT50 - Remove the Speakers

21
9.2.11. Remove the Control unit assy
1. Unlock the cable clampers and the tapes to free the
cables.
2. Disconnect the connector (C14).
3. Remove the claws (×2 ) and remove the Control unit
assy.
9.2.12. Remove the Speakers
1. Unlock the cable clampers and the tapes to free the
cables.
2. Disconnect the Relay connector.
3. Remove the Speaker clip (each) and remove the
Speakers (L, R).
9.2.13. Remove the Woofer
1. Unlock the cable clampers and the tapes to free the
cables.
2. Disconnect the woofer connector.
3. Remove the screws (×3 ).
4. Remove the Woofer.
9.2.14. Remove the SU-Board
1. Disconnect the flexible cables (SU1, SU2, SU3, SU4 and
SU5) connected to the SU-Board.
2. Disconnect the flexible cable (SU11-SD11) and the bridge
connector (SC41-SU41).
3. Remove the screws (×3 , ×2 ) and remove the SU-
Board.
9.2.15. Remove the SD-Board
1. Disconnect the flexible cables (SD1, SD2, SD3, SD4 and
SD5) connected to the SD-Board.
2. Disconnect the flexible cable (SU11-SD11) and the bridge
connectors (SC42-SD42 and SC46-SD46).
3. Remove the screws (×3 , ×2 ) and remove the SD-
Board.