21
9.2.11. Remove the SD-Board
1. Disconnect the flexible cables (SD1, SD2, SD3, SD4 and
SD5) connected to the SD-Board.
2. Disconnect the flexible cable (SU11-SD11) and the bridge
connectors (SC42-SD42 and SC46-SD46).
3. Remove the screws (×3 , ×2 ) and remove the SD-
Board.
9.2.12. Remove the SC-Board
1. Unlock the tapes to free the cables.
2. Disconnect the connector (SC2).
3. Disconnect the flexible cable (SC20).
4. Remove the screws (×6 ) and remove the SC-Board.
9.2.13. Remove the SS-Board
1. Disconnect the connector (SS11).
2. Disconnect the flexible cable (SS33).
3. Disconnect the flexible cables (SS62, SS64, SS65 and
SS67).
4. Remove the screws (×5 ) and remove the SS-Board.
9.2.14. Remove the USB cable (A-WiFi)
1. Remove the screw (×1 ).
2. Remove the USB cable (A-WiFi).
9.2.15. Remove the Metal bracket bottom
1. Remove the screws (×6 , ×2 ) and the Metal
bracket bottom.
To Next Page
Loading...
