Panasonic TC-P65VT30 - Remove the Side unit assy; Remove the SU-Board; Remove the SD-Board; Remove the SC-Board

29
9.8. Remove the Side unit assy
1. Disconnect the connector (C14).
2. Remove the claws (×2 ) and remove the Side unit
assy.
3. Remove the screw (×1 ).
4. Remove the Side unit mount metal.
9.9. Remove the SU-Board
1. Disconnect the flexible cables (SU1, SU2, SU3, SU4 and
SU5) connected to the SU-Board.
2. Disconnect the flexible cable (SU11-SD11) and the bridge
connector (SC41-SU41).
3. Remove the screws (×3 , ×2 ) and remove the SU-
Board.
9.10. Remove the SD-Board
1. Disconnect the flexible cables (SD1, SD2, SD3, SD4 and
SD5) connected to the SD-Board.
2. Disconnect the flexible cable (SU11-SD11) and the bridge
connectors (SC42-SD42 and SC46-SD46).
3. Remove the screws (×3 , ×2 ) and remove the SD-
Board.
9.11. Remove the SC-Board
1. Remove the SU-Board and SD-Board. (See section 9.9.
and 9.10.)
2. Disconnect the connector (SC2).
3. Disconnect the flexible cable (SC20).
4. Remove the screws (×9 ) and remove the SC-Board.
Caution:
THERMAL CONDUCTIVE SHEET between Plasma Dis-
play Panel and SC-board should not be removed when
replacing SC-board.