8
4 Specifications
Q TV
Q 3D Eyewear
Power Source AC 120 V, 60 Hz
Power Consumption
Rated Power Consumption 516 W
Standby condition 0.2 W
Plasma Display panel
Drive method AC type
Aspect Ratio 16:9
Visible screen size 65 inch class (64.7 inches measured diagonally)
(W × H × Diagonal) 56.4 inch × 31.7 inch × 64.7 inch (1,434 mm × 806 mm × 1,645 mm)
(No. of pixels) 2,073,600 (1,920 (W) × 1,080 (H)) [5,760 × 1,080 dots]
Sound
Audio Output 22 W [ 6 W + 6 W + 10 W ] ( 10 % THD )
PC signals VGA, SVGA, XGA, WXGA, SXGA
Horizontal scanning frequency 31 - 69 kHz
Vertical scanning frequency 59 - 86 Hz
Channel Capability (Digital/Analog) VHF/ UHF: 2 - 69, CATV: 1 - 135
Operating Conditions
Temperature: 32 °F - 104 °F (0 °C - 40 °C)
Humidity: 20 % - 80 % RH (non-condensing)
Connection Terminals
VIDEO IN VIDEO: RCA PIN Type × 1 1.0 V [p-p] (75 Ω)
AUDIO L-R: RCA PIN Type × 2 0.5 V [rms]
COMPONENT IN Y: 1.0 V [p-p] (including synchronization)
P
B
, P
R
: ±0.35 V [p-p]
AUDIO L-R: RCA PIN Type × 2 0.5 V [rms]
HDMI 1-4 TYPE A Connector × 4
This TV supports [HDAVI Control 5] function.
USB 1-3 USB 2.0 Type A connector x 3 (DC 5 V MAX500mA)
PC D-SUB 15 PIN: R, G, B / 0.7 V [p-p] (75 Ω)
HD, VD / 1.0 - 5.0 V [p-p] (high impedance)
LAN (for VIERA Connect) RJ45 (10BASE-T/100BASE-TX)
Card slot SD CARD slot × 1
RS232C (Serial) D-sub 9pin for external control
DIGITAL AUDIO OUT PCM / Dolby Digital, Fiber Optic
FEATURES 3D Y/C FILTER
CLOSED CAPTION V-Chip
VIERA Connect Media player
3D IMAGE VIEWER HDAVI Control 5
Dimensions (W × H × D)
Including pedestal 61.9 inch × 39.2 inch × 15.8 inch (1,570 mm × 994 mm × 400 mm)
TV Set only 61.9 inch × 37.7 inch × 1.6 (2.4) inch (1,570 mm × 956 mm × 39 (60) mm)
Mass
Including pedestal 138.9 lb. (63.0 kg)
TV Set only 123.5 lb. (56.0 kg)
Note
• Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.
Lens type Liquid Crystal Shutter
Usage temperature range 32 °F - 104 °F (0 °C - 40 °C)
Charging power supply DC 5 V (supplied by USB terminal of a Panasonic TV)
Battery Lithium-ion polymer rechargeable battery
DC 3.7 V, 70 mAh
Operation time*
1
: Approx. 30 hours
Charging time*
1
: Approx. 2 hours
Viewing range*
2
Transmitter for 3D Eyewear
Within 10 feet 5 inch (3.2 m) from front surface
(Within ± 35° horizontal, ± 20° vertical)
Materials Main body: Resin
Lens section: Liquid crystal glass
Dimensions Width 6.70 inch (170.1 mm)
(not including nose pad part) Height 1.63 inch (41.2 mm)
Overall length 6.69 inch (169.8 mm)
To Next Page
Loading...
