PAUSE: Used to insert a pause when storing
a telephone number in programming.
FWD/DND: Used to perform Call Forwarding
and Do Not Disturb.
CONF (Conference): Used to establish
multiple-party conversations.
INTERCOM: Used to make and receive
extension to extension calls.
AUTO ANS (Auto Answer)/MUTE:
Used to received an incoming call in hands-free
mode, or to mute the microphone during a
conversation.
AUTODIAL/STORE: Used for
System/Personal Speed Dialing, or for storing
program changes.
TRANSFER: Used to transfer a call to
another party.
REDIAL: Used to redial the last number
dialed.
MESSAGE: Used to call back to voice mail
when a message is left in your mailbox.
FLASH/RECALL: Used to disconnect the
current call and make another call without
hanging up.
HOLD: Used to place a call on hold.
SP-PHONE (Speakerphone): Used for
hands-free operation.
Navigator/Volume Key: Used to adjust
volume, or display contract or select desired
items. (display phones only)
CANCEL: Used to cancel the selected item.
(Display phones only)
PROGRAM: Used to enter programming
mode. (Non-Display phones only)
Flexible CO: Used to access outside lines.
Also programmable as another extension
(DSS) or a One-Touch Speed Dial access
button.
To Next Page
Loading...
