Panasonic Technics SL-1360-(ES) - Page 10

@STYLUS SET-DOWN POINT (See Fig. 5)
*To be adjusted if the tonearm fails to set-down at the right
starting point at the beginning of the record.
Rubber cap above adjustment must be removed.
Clockwise rotation ....This will move the set-down point
inward, toward the record center.
Counterclockwise
rotation ............ This will move the set-down point
outward, away from the record center.
Fig. 5
@TONEARM RETURN POINT (See Fig. 6)
*In some cases, the tonearm will tend to return to its rest po-
sition before playing has finished. in other cases, it may fail to
return to the rest position even after piaying the last groove of —
the record.
*Rotate this screw to correct for either condition.
Clockwise rotation ....The tonearm will return to its rest later.
Counterclockwise |
rotation ............ The tonearm will return to tts rest
earlier.
~
Return-point adjustment
VW
Fig. 6
Gigwglgwguqugvgdgugu gi guqgugw gu guqu qu gwqT qu gqugulqgwqwgulgugquguiqwgugugququgugtigvlqugququdgwgugqwquguqugqvs
~ MEMO