Need help?Do you have a question about the Panasonic Technics SL-1700 and is the answer not in the manual?
Turntable Specifications| turntable platter material | Aluminum die-cast |
|---|---|
| turntable platter diameter | 33 cm |
| turntable speeds | 33-1/3 and 45 rpm |
Tonearm Specifications| tonearm length | 230 mm |
|---|---|
| tracking error angle | within +3° at the point of 145 mm from the center |
| offset angle | 22.9° |
Power| power supply | AC 120 V |
|---|---|
| power frequency | 50/60 Hz |
Weight and Dimensions| dimensions | 47-12/16 x 14.9/16 inches |
|---|---|
| weight | 8 kg, 19.4 lbs |
Identifies and labels all parts of the turntable system.
Verifies all included parts are present for assembly.
Instructions for removing shipping spacers before operation.
Guides on placing the platter and mat on the motor spindle.
Steps for installing a record cartridge into the head shell.
Details on how to securely attach the head shell to the tonearm.
Achieving horizontal balance and setting stylus force accurately.
Setting the anti-skating control to match stylus pressure.
Instructions for properly fitting the dust cover.
Recommendations for optimal placement to avoid vibration and interference.
Essential steps before starting playback, like lever and speed settings.
How to begin, play, and end a record playback.
Fine-tuning the distance for the cueing lever.
Adjusting when the tonearm automatically returns to rest.
Using pitch controls and screws for precise speed calibration.
Guidance on cleaning the dust cover, base, and stylus tip.
Advice for head shell operations and general unit care.
Key features of the turntable's vibration damping and direct drive motor.
Details on Hi-Fi performance, IC, and construction aspects.
Describes the tonearm's sensitivity, damping, and construction.
Technical details for turntable, tonearm, and general operating parameters.
To Next Page