Need help?Do you have a question about the Panasonic Technics SL-1300 and is the answer not in the manual?
General| Drive Method | Direct Drive |
|---|---|
| Motor | Brushless DC motor |
| Speeds | 33 1/3 and 45 rpm |
| Wow and Flutter | 0.03% WRMS |
| Effective Arm Length | 230 mm |
| Overhang | 15 mm |
| Tracking Force Adjustment | 0-3g |
| Platter | Aluminum Diecast |
| Tonearm | Static-balanced |
| Cartridge | Not Specified (User's Choice) |
| Rumble | -50dB (IEC 98A weighted), -70dB (IEC 98B weighted) |
| Tonearm Type | Static Balance S-Shaped Tonearm |
Connect the AC power plug only after assembly is completed.
This dual-function illuminator is lit when the player is 'on' and turntable is rotating.
Adjust turntable speed by turning clockwise or counterclockwise.
Fine-tune speed adjustment using screws if pitch controls are insufficient.
Part of the motor rotor; do not remove unnecessarily or expose to dust/filings.
Dots on the platter rim for checking turntable speed accuracy at 33-1/3 and 45 RPM.
Corrects tonearm return timing before or after record playback.
Adjusts the tonearm's starting point on the record groove.
Sets the stylus tip height (5-10mm) when the tonearm is lifted.
Compensates for skating force, adjusted to match stylus pressure.
Secure the tonearm when not in use; release before operation.
Raises or lowers the tonearm onto the record surface.
Sets the number of record plays for automatic repeat function.
Set to match the diameter of the record to be played.
Initiates automatic start and stop functions for playback.
Mount the platter and sheet onto the motor shaft; avoid dust and impacts.
Connect wires, install cartridge in head shell, adjust overhang to 52mm.
Balance the tonearm by adjusting the weight until it floats horizontally.
Set the knob to match the stylus pressure for proper compensation.
Place dust cover securely in hinges; remove if 'HOWLING' occurs.
Release clamp, set controls, pull lever for automatic start and playback.
Release clamp, raise cueing lever, place tonearm on groove, lower lever.
Raise cueing lever to ascend tonearm and interrupt playback.
Use only a soft, dry cloth; avoid cleaners containing alcohol or thinner.
Apply 2-3 drops of special oil to the turntable shaft as needed.
Details on drive method, motor, platter, speeds, and noise levels.
Specifications for tonearm type, length, overhang, and stylus pressure.
Information on power supply, consumption, dimensions, and weight.
Direct drive design where platter is part of the motor for reduced wear.
DC brushless motor speed is independent of power supply frequency.
Special circuitry ensures stable and accurate rotational speed.
Features auto-lead in, return, cut, repeat, and memo-repeat functions.
Precision parts and construction ensure quiet, precise operation.
Strobo dots and prism illuminator provide easy speed viewing.
Attractive and compact design using a die-cast aluminium base.
Low power consumption (0.1W motor, <4W total) ensures longevity and reliability.
Gimbal-suspended tonearm with four pivot bearings for sensitivity.
Die-cast aluminium head shell for vibration prevention and easy setup.
Eliminates high-frequency losses for clear audio, suitable for CD-4 records.
Viscous-damped cueing for gentle, precise tonearm placement.
Helical movement allows easy and accurate stylus pressure adjustment.
Precisely designed mechanism to accurately cancel inside force.
To Next Page