Need help?Do you have a question about the Panasonic Technics SL-1800 and is the answer not in the manual?
Turntable Specifications| drive method | Direct Drive |
|---|---|
| motor | Back Electromotive Force Frequency Generator servo DC motor |
| platter material | Aluminum die-cast, 33 cm (13") |
Tonearm Specifications| effective length | 239 mm (9-1/16") |
|---|---|
| overhang | 15 mm (19/32") |
| friction | 7 mg (horizontally and vertically) |
Weight and Dimensions| weight | 8.5 kg |
|---|---|
| dimensions | 125 x 48.3 x 96.9 cm |
| head shell weight | 9.59 g |
How to correctly place the turntable platter and mat on the motor spindle.
Steps for inserting the head shell and mounting the cartridge onto the tonearm.
Procedure for setting the tonearm's horizontal balance and stylus pressure.
How to set the anti-skating force control to match stylus pressure.
Instructions on how to correctly attach and remove the dust cover.
Guidelines for unit positioning, power, and output terminal connections.
How to adjust the tonearm lift height for optimal cartridge clearance.
Fine-tuning turntable speed using pitch control knobs and strobe dots.
Precautions for handling the turntable platter and motor shaft.
Instructions for cleaning the dust cover, base, and protecting from chemicals.
Advice on cleaning stylus, records, and head shell terminals for optimal performance.
Details on the vibration-damping unit and unique direct-drive motor construction.
Information on the Back Electromotive Force Frequency Generator IC and its benefits.
Description of the universal tonearm, diecast head shell, and damping features.
To Next Page
