Panasonic Technics SL-1800

We want to thank you for selecting the SL-1800, Direct Drive Turntable System.
For optimum performance, we recommend that you read these instructions caretully.
Parts identification
=
Output terminals
—————_—
Turntable mat
Turntable pl
Motor shaft
(Centre spindle)
Strobe dots
Strobe mark
Strobe iluminator?
pilot lamp
Speed selector
eS
Head
shett
Pitch control knobs:
Turntable base
Assembly and set-up w
Caution:
Never connect the AC power plug belore the assembly has
been completed
Attach the dust cover last. so that assembly of other parts
and adjustments can be made efficiently,
@check
the
parts
Turntable unit, 45 r.p.m. adaptor 1 1
Turntable platter 1 Special oil
Turntable mat 1 Balance weight 1
Dust cover 1 Head shell
Overhang gauge 1
@Remove the transport spacers.
spacers for transportation (located at lelt-hang
front corner, right-hand rear corner, and then the tonearm
base), and the tape fastening the tonearm. (See Figs. 2 and 3),
“Warning: To prevent fire or shock hazard,
do
not
expose
this
appliance
to
rain
or
moisture.”
1