Panasonic TH-32LRH30U - Product Specifications; Power, Display, and Audio Specifications; Connection Terminals and Features; Physical Dimensions and Mass

35
Support
Information
Specifications
Care and Cleaning
Specifications
Note
Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.
TH-32LRH30U
Power Source AC 110-127 V, 60 Hz
Power
Consumption
Rated Power
Consumption
106 W
Standby condition 0.8 W
Display panel
Aspect Ratio 16:9
Visible screen size
(W × H × Diagonal)
(No. of pixels)
32” class (31.5 inches measured diagonally)
27.5 ” × 15.4 ” × 31.5 ”(698 mm × 392 mm × 800 mm)
1,049,088 (1,366 (W) × 768 (H)) [4,098 × 768 dots]
Sound
Speaker 1-way 2 bottom SP System
Audio Output 20 W [10 W + 10 W] (10 % THD)
PC signals
VGA, SVGA, XGA, WXGA, SXGA
Horizontal scanning frequency 31 - 69 kHz
Vertical scanning frequency 59 - 86 Hz
Channel Capability-
ATSC/NTSC (Digital/Analog)
VHF/ UHF: 2 - 69, CATV: 1 - 135 (support MPEG4 H.264 decode)
Operating Conditions
Temperature: 32 °F – 95 °F (0 °C – 35°C)
Humidity: 20 % – 80 % RH (non-condensing)
Connection Terminals
VIDEO IN 1-2
VIDEO: RCA PIN Type × 1 1.0 V[p-p] (75 Ω)
AUDIO L - R: RCA PIN Type × 2 0.5 V [rms]
COMPONENT IN
Y: 1.0 V [p-p] (including synchronization)
P
B, PR: ±0.35 V [p-p]
AUDIO L-R: RCA PIN Type × 2
0.5 V [rms]
HDMI 1-2 TYPE A Connector × 2
PC
D-SUB 15PIN: R,G,B / 0.7 V [p-p] (75 Ω)
HD, VD / 1.0 - 5.0 V [p-p] (high impedance)
SERIAL CTRL M3 Jack × 1 (RS232C)
PILLOW SPEAKER M3 Jack × 1
DATA/MTI
RJ-11C (6pin)
•
Multiple Television Interface (MTI)
•
Nintendo Controller Power (pin3: DC12V / 30mA (max))
•
SNES Controller
Card slot SD CARD slot × 1
FEATURES
3D Y/C FILTER, CLOSED CAPTION,
V-Chip, Vesa compatible, Integrated Pro: Idiom
Dimensions (W × H × D) 31.5 ” × 20.2 ” × 3.3 ”
(798 mm × 511 mm × 83 mm)
Mass
22.0 lb. (10.0
) NET
[TH-32LRH30U]
3.3 ”
(83 mm)
31.5 ” (798 mm)
20.2 ” (511 mm)