13
Quick Start
Guide
Identifying Controls
Connections
Identifying Controls
C.A.T.S (Contrast Automatic Tracking System)
Power indicator
( on: red, off: no light)
Note
The TV consumes a small amount of electric energy even when turned off.
Do not place any objects between the TV remote control sensor and remote control.
TV controls/indicators
Changes the input mode
Chooses menu and submenu entries
Volume up/down
Selects channels in sequence
Front of the TV
POWER button
Menu navigations
Remote control
Switches TV On or Off (Standby)
Changes the input mode (p. 15)
Displays Main Menu (p. 19, 28)
Colored buttons
(used for various functions)
Volume up/down
Sound mute On/Off
Changes aspect ratio (p. 14, 30)
Switches to previously viewed channel
Use for SD mode operation
Closed Caption On/Off (p. 14)
Selects Audio Mode for TV viewing (p. 14)
Exits from menu screen
Viewing from SD Card (p. 18)
Selects/OK/Change
Returns to previous menu
Channel up/down
Displays or removes the channel
banner (p. 14)
Numeric keypad to select any channel
(p. 14) or press to enter alphanumeric
input in menus
(p. 15, 16, 22, 24, 27)
Use for digital channels. (p. 14)
Remote control sensor
within about 23 feet
(7 meters) in front of the
TV set
For other Remote control, please refer to the operating manual for it.
: Disable keys
: Not possible when connected to TA
(Online mode)
: For setup mode only
To Next Page
Loading...
