23
Advanced
How to Use Menu Functions
Menu list
Menu Item Adjustments/Configurations (alternatives)
Picture
Picture mode
Selects from preset picture modes for optimal viewing. Mode is saved separately for each input.
(Vivid/Standard/Home theater/Cinema/Custom)
Back light
Adjusts backlight’s luminance (light intensity). (0-100)
Contrast, Brightness,
Color, Tint, Sharpness
Adjusts the color, brightness, etc. for each picture mode to suit your taste.
•
Display range
Contrast/Color/Sharpness: 0 - 100
Brightness/Tint: -50 - +50
Color temp.
Selects color temperature preference, from "cool" (bluish) to "warm" (reddish) or normal.
(Cool2/Cool1/Normal/Warm1/Warm2)
Vivid color
Enhances green and blue color reproduction, especially outdoor scenes. (On/Off)
A.I. picture
Enriches dark areas without affecting black level or brightness in the overall picture. (On/Off)
C.A.T.S.
Contrast Automatic Tracking System (C.A.T.S.) adjusts the screen brightness and contrast
according to the room's ambient light conditions. (On/Off)
Video NR
Reduces noise, commonly called snow. Leave it off when receiving a strong signal. (Auto/High/Mid/Low/Off)
MPEG NR
Reduces noise of specific digital signals of DVD, Cable box, etc. (Auto/Strong/Medium/Weak/Off)
Motion picture setting
Improves motion picture quality by reducing motion blur. (Strong/Mid/Weak/Off)
Pro settings
Panel brightness
Selects different levels of overall panel brightness. (High/Mid/Low)
AGC
Automatic Gamma Control. Increases automatically the brightness of a dark signal. (0-15)
Black extension
Adjust the gradations in dark shades of the image. (0-15)
W/B detail adjustment
Adjusts the white balance for red/green/blue areas. (-50 - +50)
Color detail adjustment
Adjusts the color for red/green/blue areas. (-50 - +50)
Gamma detail adjustment
Gamma correction. Adjusts the intermediate brightness of the image. (Default/2.4/2.2/2.0/1.8)
Reset to defaults
Resets all Pro settings adjustments to factory default settings.
Advanced picture
3:2 pulldown
Reduces judder in film-based content by transforming 24 fps to 30 fps (non-HDMI). (Auto/On/Off)
•
Available for interlaced content (480i or 1080i) via analog source.
1080p pixel direct
Enables the support of a 4:4:4 digital video format signal. Use only with a 4:4:4 capable source. (On/
Off
)
•
Available only for HDMI 1080p input.
HDMI content type
Sets content type to each HDMI input. (Graphics/Photos/Auto/Off)
Auto: Switches content type automatically depending on the HDMI signal information.
Photo: Best setting for JPEG viewing.
Graphics: Best setting for On-Screen display of connected equipment.
Auto detail setting: Selectable the effect on each content type in Auto mode.
HDMI/DVI RGB
range
Prevents the blown out highlights and blocked up shadows when a wide-range signal is received.
Selects between standard RGB range (16-235 bits) or non-compliance (0-255 bits).
(Auto/Nonstandard/Standard (16-235))
Auto: Switches the RGB range (Nonstandard/Standard (16-235)) depending on the HDMI signal information.
Black level
Selects Dark or Light. Valid only for external input signals. (Light/Dark)
3D Y/C filter
Minimizes noise and cross-color in the picture.
(On/
Off
)
Screen settings
Screen format
Changes the format (aspect ratio). Lets you choose the aspect depending on the format of received
signal. (Full/JUST/4:3/ZOOM/H-FILL/SIDECUT JUST/SIDECUT ZOOM)
SD signal: Full/JUST/4:3/ZOOM
HD signal: Full/JUST/4:3/ZOOM/H-FILL/SIDECUT JUST/SIDECUT ZOOM
Overscan
Selects the screen area displaying the image for FULL aspect.
(On/
Off
)
On: Enlarges the image to hide the edge of the image.
Off: Displays the image in the original size.
Set to On if noise is generated on the edge of the screen.
H size
Adjusts the horizontal display range to reduce noise of both side edges of an image. (Size 1/Size 2)
Size 2: Adjusts the image size according to the aspect mode to reduce noise.
Aspect mode: 4:3
The width will be decreased on both sides to reduce noise.
Aspect mode: Full/JUST/SIDECUT JUST/(H-FILL/ZOOM/SIDECUT ZOOM)
The width will be increased on both sides to reduce noise.
Zoom adjustments
Adjusts vertical position and size when FORMAT setting is set to JUST or Zoom.
- JUST/SIDECUT JUST: V-size max is 3
- ZOOM/SIDECUT ZOOM: V-size max is 15
Screen display
Turns the screen off when you select.
(On/
Off
)
•
The sound is active even if the screen turns off.
•
Press any buttons to turn the screen on.
•
This function is effective in reducing power consumption when listening to the sound without
watching the TV screen.
Copy adjustment
You can copy the selected Cinema or Custom settings and apply them to all or other input.
Settings are basic picture settings and Pro settings.
Reset to defaults
Resets all picture adjustments to factory default settings except for advanced settings.
To Next Page
Loading...
