Panasonic TH-37PE50B - Picture and Sound Settings

6.13. Remove the SD-Board
1. Remove the screws (×2 )
2. Slide the SD-Board to the left to disconnect from a coupler
(SC42 - SD42) on the SC-Board and disconnect a coupler
(SD46 or SC46).
3. Disconnect the flexible cables (SD1, SD2, SD3) connected
to the SU-Board, and remove the SD-Board.
6.14. Remove the SC-Board
1. Disconnect the couplers (SC2, SC20, SC23).
2. Remove the screws (×6
) and remove the SC-Board.
13
TH-42PA50E / TH-42PE50B / TH-37PA50E / TH-37PE50B