■ Available mode indicator for each type of broadcast
●
NICAM - Used in New Zealand, Singapore, Hong Kong, etc.
– Regular broadcast (Standard Audio): No indicator /
– Regular + NICAM MONO I (MAIN I): /
– NICAM STEREO: /
– NICAM DUAL MONO (MAIN I / SUB II): / /
●
A2 (German) - Used in Australia, Malaysia, etc.
– Regular broadcast (Standard Audio): No indicator /
– BILINGUAL or DUAL MONO (MAIN I / SUB II): /
– STEREO: /
= Note =
●
If the stereo signal is poor or the receiving conditions are not optimum or if
STEREO:MONO automatic switching occurs, it is recommended to switch
from STEREO to MONO.
●
Selected mode is not affected when the contents of the receiving signal
change.
●
When the receiving conditions deteriorate, listening will be easier if the
mode is set to the MONO position pressing the Sound Selection button.
●
DUAL, also known as DUAL MONO or as BILINGUAL is not currently
transmitted in some countries.
- 93 -
To Next Page