15
Quick Start
Guide
Identifying Controls
Connections
Note
The TV consumes a small amount of electric energy even when turned off.
Do not place any objects between the TV remote control sensor and remote control.
Do not place C.A.T.S. in a blocked area.
Identifying Controls
TV controls/indicators
Remote control
For other Remote control, please refer to the operating manual for it.
*
: Disable key
r: For service only
Switches TV
On or Off (Standby)
Viewing from external media
Sets the period after which the TV
turns to standby automatically
Displays Main Menu (p. 22, 32)
Displays or removes the
channel banner (p. 16)
Displays Options Menu for special
functions
(when available)
Numeric keypad to select any
channel (p. 16) or press to
enter alphanumeric input in
menus
Volume up/down
r
Sound mute On/Off
r
Closed Caption On/Off (p. 16)
Selects Audio Mode for TV
viewing (p. 16)
*
Changes the input mode (p. 17)
Exits from menu screen
Selects/OK/Change
Returns to previous menu
Changes aspect ratio
(p. 16, 40)
Channel up/down
Switches to previously viewed
channel
Power indicator
( on: red, off: no light)
Front of the TV
Back of the TV
Remote control sensor within about 23 feet
(7 meters) in front of the TV set
C.A.T.S. (Contrast Automatic Tracking System)
Selects Menu and Submenu entries
Changes the input mode/
Press and hold down for MENU
function (For setup mode only)
Volume up/down
Selects channels
in sequence
POWER button
To Next Page
Loading...
