31
TH-42PF30U
21. Remove 8 screws ( ) and then remove SN-Board.
22. Disconnect the connector (SS11).
23. Remove the flexible cables from the connectors (C23,
SS61, SS66).
24. Remove 7 screws and then remove SS-Board.
25. Disconnect the connector (C25).
26. Remove 7 screws and then remove P-Board.
27. Remove the flexible cable from the connectors (C10,
C20).
28. Remove 7 screws and then remove the Handle Fixing
Metal (L, R).
29. Pull the bottom of the Plasma Display Panel forward
(arrow1).
30. Slide the Plasma Display Panel and then remove the
Plasma Display Panel (arrow2).
31. Remove 10 screws and then remove the Hanger Assy (L,
R), the Stand Pole Bracket Assy (L, R) and the Hanger
Fixing Metal Assy (L, R).
To Next Page
Loading...
