What to do if my Panasonic TH-42PF20W Monitor has no picture?
If your Panasonic Monitor shows no picture, ensure it is properly plugged into the AC outlet and switched on. Check by pressing the power switch or the stand-by button on the remote control. You should also check the Picture and Brightness/Volume settings.
What to do if my Panasonic TH-42PF20W picture is cut off when using zoom function?
If the picture on your Panasonic Monitor is cut off when using the zoom function, adjust the position of the picture on the screen.
Why does my Panasonic TH-42PF20W have missing image areas when using zoom function?
When using a video software program with a screen wider than one in the 16:9 mode, blank areas separate from the images are formed at the top and bottom of the screen on your Panasonic Monitor.
Why does my Panasonic TH-42PF20W remote control not work?
The remote control might not be working because the batteries are completely discharged or not inserted correctly. Also, check if the remote control sensor is exposed to outdoor light or strong fluorescent light. Ensure that you are using the remote control specifically designed for use with this unit.
Why does my Panasonic TH-42PF20W power off automatically?
If your Panasonic Monitor unexpectedly turns off, check the settings of “PC Power management”, “DVI-D Power management” and “Auto power off” in the Setup menu.
Why is my Panasonic TH-42PF20W making a cracking sound?
If your Panasonic Monitor is making a cracking sound, and there is nothing wrong with the picture or sound, this is the sound of the cabinet undergoing very slight contractions in response to changes in the room temperature.
General| Screen Size | 42 inches |
|---|---|
| Display Technology | Plasma |
| Aspect Ratio | 16:9 |
| Contrast Ratio | 4000:1 |
| Resolution | 1920 x 1080 |
| Input Ports | HDMI, DVI-D, Component, Composite |
To Next Page