Panasonic TH-42PH10EK - Picture Adjustments; Advanced Settings (TH-42 PH10 EK;S, TH-50 PH10 EK;S, TH-58 PH10 EK)

9 Service mode
9.1. CAT (computer Aided Test) mode
To exit the CAT mode, access the ID mode and switch off the main power.
9.1.1. IIC mode
Select the IIC mode by Up/Down button on the remote control at the front page of CAT mode and then press the Action button
on the remote control.
Subject and item are mentioned on “IIC mode structure”.
To exit the IIC mode, press the R button on the remote control.
24
TH-42PH10BK / TH-42PH10BS / TH-42PH10EK / TH-42PH10ES