2. Set the picture controls: -
Picture mode: Normal
White balance: Normal
8.1.2. Adjustments
Adjust and confirm indicated test point for the specified voltage.
Adjust
Name Volume Voltage Test
Point
Remarks
Vsus R621 170V ±
1V
P1 pin 3 UY/UZ
R540 Except UY/UZ
Vda R646 67V ±
0.5V
P12 pin
1
UY/UZ
R537 Except UY/UZ
Confirm
Name Voltage Test Point Remarks
15V 15.3V ± 0.5V P23 pin 2
13V 13.3V ± 0.5V P25 pin 5
15V 15.2V ± 0.5V P25 pin 1
Audio 13V 12.5V ± 0.8V P6 pin 1
Audio-13V -12.5V ± 0.8V P6 pin 3
5V 5.2V ± 0.3V P25 pin 7
STB 5V 5.0V ± 0.3V P27 pin 4
Fan 15V 15.0V ± 0.5V P10 pin 1
Fan 5V 5.2V ± 0.3V P10 pin 4
PFC 380V ± 15V C447(+) Except UY/
UZ
8.2. Driver Set-up
8.2.1. Item / Preparation
1. Input an APL 100 % white signal.
2. Set the picture controls: -
Picture mode: Normal
White balance: Cool
Aspect: 16:9
8.2.2. Adjustments
11