9.1.1. IIC mode
Select the IIC mode by Up/Down button on the remote control at the front page of CAT mode then
press the Action button on the remote control.
Subject and item are mentioned on page 14.
To exit the IIC mode, press the R button on the remote control.
9.1.2. CD mode
Select the CD mode by Up/Down button on the remote control at the front page of CAT mode
then press the Mute button on the remote control more than 5 sec.
Micom software version (IC9354), this version can be upgrade by
1. replace of new version IC
2. Loading the new version software from loader tool, TZSC07036.
Memory data change
To exit the CD mode, press the R button on the remote control.
9.1.3. SD mode
Select the SD mode by Up/Down button on the remote control at the front page of CAT mode then
press the Action button on the remote control.
16
To Next Page
Loading...
