Panasonic TH-42PX20U/P

55
H-POS
H-SIZE
V-POS
V-SIZE
CLOCK PHASE
(RGB/PC in Mode)
When the Position Right
“ ”
button is pressed
When the Position Right
“ ”
button is pressed
When the Position Right
“ ”
button is pressed
When the Position Right
“ ”
button is pressed
When the Position Left
“ ”
button is pressed
When the Position Left
“ ”
button is pressed
When the Position Left
“ ”
button is pressed
When the Position Left
“ ”
button is pressed
Helpful Hint (
NORMALIZE
Normalization)
While the PICTURE POS./SIZE display is active, if either the N button on the remote control is pressed at any time or the
(ACTION button) is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.
Adjusting screen
Select PICTURE POS./SIZE from the “PC MENU” during PC
input signal.
Press to adjust POS./SIZE.
Press to select H-POS/H-SIZE/V-POS/
V-SIZE/CLOCK PHASE.
During “RGB” input signal.
1
3
2
Note:
If a “Cue” or “Rew” signal from a VCR or DVD
player is received, the picture position will shift
up or down. This picture position movement
cannot be controlled by the PICTURE POS./
SIZE function.
Flickering and distortion can be eliminated by using the Position Left
“ ”
or Right
“ ”
button to
carry out adjustment.
PC MENU
NORMAL
PICTURE POS./SIZE
NORMALIZE
H-POS
H-SIZE
V-POS
V-SIZE
CLOCK PHASE
A
C
T
I
O
N
CH
CH
VOL VOL
A
C
T
I
O
N
CH
CH
VOL VOL
Adjusting PICTURE POSITION/SIZE