Panasonic TH-42PX50U - On-Screen Menu Displays for Navigation; Picture, Audio, and Timer Adjust Menus

Removal of the SU and SD Boards
1. Remove the 2 screws of the SU board as
indicated in figure 15.
2. Disconnect the bridge connector (SU45 or
SC45) and slide the SU-board to the left to
disconnect the coupler (SC41 -SU41) from
the SC board.
3. Remove the flexible cables (SU1, SU2, SU3,
SU4) and place the SU board aside.
Installation is performed after the removal of
the SC board.
Figure 15. SU and SD boards
Page 8