30
EZ Sync TM"HDAVI Control TM''*
:_ Simultaneously control all Panasonic "HDAVI Control" equipped components using one button
on one remote.
Enjoy additional HDMI Inter-Operability with Panasonic products which have "HDAVI Control" function.
This TV supports "HDAVl Control 2" function.
Connections to some Panasonic equipment (DVD Recorder DIGA, HD Camcorder, RAM theater,
Player theater, Amplifier, etc.) with HDMI cables allow you to interface automatically.
The equipment with "HDAVl Control" function enables the following operations:
Automatic Input Switching, Power on link, Power off link and Speaker control (p. 31).
In addition, the equipment with "HDAVl Control 2" function enables the following operation:
EZ Sync Control only with TV's remote control (for "HDAVl Control 2") (p. 31).
EZ Sync"HDAVl Control",based on the controlfunctions provided byHDMI which is an industrystandard
known as HDMI CEC (ConsumerElectronicsControl),is a unique functionthat we have developedand added.
As such,its operationwith other manufacturers'equipment that supports HDMICEC cannot be guaranteed.
mFor thefirst time/ When adding newequipment,reconnectingthe equipment or changingthe setup.
After the connection turn the equipment on and then switch the TV on.
Select the input mode to HDMI 1 or HDMI 2 (p. 24), and make sure that an image is
displayed correctly.
@This function needs an HDMI compliant (fully wired) cable. Non-HDMI-compliant cables cannot
be utilized.
It is recommended that you use Panasonic's HDMI cable.
Recommended part number:
RP-CDHG15 (4.9 ft/1.5 m), RP-CDHG30 (9.8 ft/3.0 m), RP-CDHG50 (16.4 ft/5.0 m)
Display menu
Select "Setup"
Select "EZ Sync setting"
• Press to exit from
menu screen
EXiT
@
• Press to return
to the previous
screen
RETURN
@
Select "EZ Sync"
Select "On"
(default is On)
@If no HDMI equipment is connected or standard HDMI
equipment (non- "EZ Sync") is used, set to "Off".
At the start of the DtGA, Player theater, or RAM theater playback, the TV's input automatically switches to the input
based on the playback equipment.
@For the RAM theater, the speakers automatically switch to the theater system.
If using the DIGA operation, the TV's input automatically switches to the DIGA and DIGA menu is displayed.
You can select Home theater, or TV speakers for audio output.
Control theater speakers with the TV's remote control.
This function is available only when Panasonic Amplifier or Player theater is connected.
_i_Press E_unc
l
@_Select "Speaker output"
_3_Select "Home theater" or "TV"
• Home theater: Adjustment for equipment
Volume up / down ''_,"
MUTE
Mute ,,¢,,_
@The sound of TV is muted.
@When the equipment is turned off, TV speakers
become active.
@Selecting "Home theater" turns the equipment on
automatically if it is in standby mode.
NTV: The TV speakers are active.
In the EZ Sync menu, you can select an HDMI connected Panasonic equipment and access it quickly. Continue
using your TV's remote control to operate the equipment, pointing it at the TV.
_i_Press Ezs_nc
@_Select the equipment you want to access.
/,'"_'_ g_,select
.... (2)access
You can select available
items only.
C3_Operate the equipment with the TV's remote
control, pointing it at the TV.
@To operate the equipment, read the manual of the
equipment.
mAvailable TV's remote control buttons
RETURN
SuB
MENU
equipment
• • , _ Available when the purpose of the keys
_ _ are displayed on screen
Move the cursor/Select
Set/Access
Return to the previous menu
Display the Functions menu on the
When "Set" is selected (p. 29), TV is turned on automatically and switches to the appropriate HDMI input whenever
EZ Sync compatible equipment is initially turned on and Play mode is selected.
When "Set" is selected (p. 29) and the TV is turned off, all connected EZ Sync compatible equipment is also
automatically turned off.
@DIGA (Panasonic DVD Recorder) will not turn off if it is still in rec mode.
Caution: The TV remains on even if the EZ Sync compatible equipment is turned off.
"TV" is the default setting. To set the Home Theater system as default speakers, change the default speakers
setting from "TV" to "Theater". Sound will be output from the Home Theater whenever the TV is powered on.
If the "ONE TOUCH PLAY" key is pressed on the remote control for Panasonic Home Theater system, the following
sequence of operations is performed automatically.
g_ Home Theater power switches On, and playback begins.
,_2_'TV power switches On, and the playback screen is displayed.
(3_Audio is muted on the TV and switches to the theater system.
FR
N
03
,.<
O
[:3
<>
©
O
o
31
To Next Page
Loading...
