14
6. Service Mode (FACTORY SETTING)
6.1. How to enter into Service Mode
Press [ - ] button of the remote control twice.
Press [ + ] button of the remote control twice.
Press [ - ] button of the remote control once.
Press [ + ] button of the remote control once.
Press [ - ] button of the remote control once.
Press [ + ] button of the remote control once.
Press [SET] button of the remote control once.
6.2. How to select item and change value
Press [UP] or [DOWN] button of the remote control to move cursor and press [SET] to select.
Press [ + ] or [ - ] button of the remote control to change value.
6.3. How to exit
Switch off the power with the [POWER] button on the main unit or the [POWER] button on the remote control.
[ON-SCREEN for FACTORY SETTIG MENU]
[Button on the remote control]
To Next Page
Loading...
