What to do if my Panasonic TH-47LF30ER has no picture?
If your Panasonic Monitor is displaying no picture, start by pressing the power switch or stand-by button on the remote control. Also, check that the monitor is properly plugged into an AC outlet and is switched on.
Why is there no color on my Panasonic TH-47LF30ER?
If your Panasonic Monitor has no color, first check if the color controls are set to the minimum level. If they are not, check the color system.
Why is my Panasonic Monitor remote not working?
If your Panasonic Monitor is not responding to the remote control, first ensure the batteries aren't completely discharged and are correctly inserted. Also, verify that the remote control sensor isn't exposed to strong light sources like outdoor light or fluorescent light. Finally, confirm you're using the remote control specifically designed for your Panasonic Monitor.
Why does my Panasonic Monitor power off automatically?
If your Panasonic Monitor unexpectedly turns off, check the settings for “No signal power off”, “PC Power management”, “DVI-D Power management” and “No activity power off”. One of these options may be enabled.
General| Screen Size | 47 inches |
|---|---|
| Panel Technology | IPS |
| Resolution | 1920 x 1080 |
| Brightness | 500 cd/m² |
| Viewing Angle (Horizontal/Vertical) | 178°/178° |
| Built-in Speakers | Yes |
| Aspect Ratio | 16:9 |
| Input Terminals | HDMI, DVI-D, VGA, Composite |
| Output Terminals | Audio Out |
| External Control Terminals | RS-232C |
Details about the three-pin mains plug, fuse, and earthing.
Guidelines for professional wall installation and bracket requirements.
Precautions for operating the LCD display safely and correctly.
Actions to take in case of malfunction or abnormal conditions.
How to connect and secure the AC power cord.
Guide to connecting various video input devices.
Detailed connection diagrams for video, component, RGB, and HDMI inputs.
Instructions for connecting DVI-D inputs and outputs, including daisy-chaining.
How to connect a computer to the PC input terminals.
How to connect the display to a computer via serial terminals for control.
Defines the structure and commands for controlling the display via serial interface.
Initial setup steps including OSD language and present time.
Explanation of the functions of buttons on the remote control.
To Next Page
