Panasonic TH-47LF30ER - Setup for Input Signals; Component; RGB-in Select; YUV; RGB-in Select

1/2
Signal
Input label
ECO Mode settings
Setup
Screensaver
Wobbling
Off
OSD Language English
(
UK
)
Component/RGB-in select
RGB
No activity power off
Disable
1/2
Signal
Input label
ECO Mode settings
Setup
Screensaver
Wobbling
Off
OSD Language English
(
UK
)
YUV/RGB-in select
RGB
No activity power off
Disable
37
Setup for Input Signals
Component / RGB-in select
Select to match the signals from the source connected to the COMPONENT/RGB IN terminal.
Y, P
B
, P
R
signals
“Component”
RGB signals
“RGB”
1
2
Press to display the Setup menu.
Press to select the “Component / RGB-in select”.
Press to select the desired input signal.
Component
RGB
Press to exit from adjust mode.
Note:
Make setting of the selected input terminal (COMPONENT/RGB IN).
3
YUV / RGB-in select
Select to match the signals from the source connected to DVI-D IN terminal.
YUV signals
“YUV”
RGB signals
“RGB”
1
2
Press to display the Setup menu.
Press to select the “YUV / RGB-in select”.
Press to select the desired mode.
YUV
RGB
Press to exit from adjust mode.
3