Panasonic TH-48JZ1000Z

12
English
≥ To remove from the TV:
≥ Do not place any objects within the full rotation range.
Be sure to remove the pedestal in the following
procedures when you use the wall-hanging bracket or
repack the TV.
1 Put the TV onto a work table with the screen panel
down on the clean and soft cloth.
2 Pull out the pedestal from the TV.
1 Remove the cable cover E.
2 Remove the assembly screws D from the pedestal.
3 Pull out the pedestal from the TV.
It is recommended to secure the pedestal to a furniture
as shown to prevent the TV from falling over.
≥ This information is designed to reduce the risk of
injuries caused by the TV falling over. However, no
measure can guarantee protection in all cases.
Attaching the fall-prevention parts
F Screw (1) ( )
G Wood screw (1)
H Band (1)
1 Remove the screw.
2 Attach the fall-prevention parts.
Adjusting the panel to your desired
angle
Removing the pedestal
E
55-inch model
65-inch model
15°
15°
(View from the top)
48-inch model
55-inch model
65-inch model
Preventing the TV from falling over
55-inch model
65-inch model
48-inch model
H
G
55-inch model
65-inch model
H
G
F
TH-48_55_65JZ1000Z_Eng_TQB4GA0033.book 12 ページ ２０２１年４月２日 金曜日 午後１時１分