28
How to Use Menu Functions
Various menus allow you to make settings for the picture, sound, and
other functions so that you can enjoy watching TV in the way best
suited for you.
@Displays the functions that can be set
(varies according to the input signal)
Select "Setup"
==Menu list
Menu Item •
Surf mode
Language
Clock
Program channel
Input labels
Monitor out
EZ Sync
Power off link
Power on link
Default speakers
Auto power on
Side bar
Select the item
CC
• Press to exit from
menu screen
EXiT
@
• Press to return
to the previous
screen
RETURN
@
No signal shut-off
No action shut-off
Display Sub Menu
sub About
MENU
Reset
Select the item •Sub menu list
seIect Menu Item •
Surf mode
Set favorite
or
next CO
Caption select
...................................................Signal meter
(Continued)
Adjustments/Configurations (alternatives)
Sets the mode to select the channel with Channel up/down button (Favorite/All)
[ Surf mode _1
® Favorite: Only channels registered as FAVORITE (p. 35)
Selects the screen menu language (p. 18)
Adjusts the clock (p. 18)
Language
Clock l
Sets channels (p. 34)
Program channel 1
Selects the terminal and label of the external equipment (p. 36)
[Comp.l/Comp.2/HDMI I/HDMI 2Nideo INideo 2]
To prevent howling and image oscillation, stops output of the pictures and audio specified in this menu.
(p. 36) (On/Off)
Displays subtitles (Closed Caption) (p. 36)
Controls equipment connected to HDMI terminals (p. 30) (On/Off)
® "Power off link", "Power on link", and "Default speakers" cannot be selected if "Off" is set.
Sets "Power off link" of HDMI connection equipment (p. 30) (Set/No)
Sets "Power on link" of HDMI connection equipment (p. 30) (Set/No)
Selects the default speakers (p. 30) (TV/Theater)
Turns TV On automatically when the cable box or a connected device is turned On (No/Set)
® The "Sleep" timer, "On / Off timer", and "First time setup" will not function if "Auto power on" is set.
(p. 38)
increases the brightness of the side bar (MidlOfflBrightlDark) (4:3 mode only)
The recommended setting is "Bright" to prevent panel "Image retention". (p. 45)
To conserve energy, the TV automatically turns off when NO SIGNAL continues more than 10 minutes.
(Set/No)
Note
® Not in use when setting "Auto power on", "On/Off Timer", "Lock", "SD Mode", or Digital channel.
® "No signal shut-off was activated" will be displayed for about 10 seconds when the TV is turned on for
the first time after turning the power off by "No signal shut-off".
® The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.
To conserve energy, the TV automatically turns off when no operation of remote or front panel key
continues more than 3 hours. (No/Set)
Note
® Not in use when setting "Auto power on" or "On/Off Timer".
® "No action shut-off was activated" will be displayed for about 10 seconds when the TV is turned on for
the first time after turning the power off by "No action shut off".
® The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off.
Displays TV version and software license.
Performing Reset will clear all items set with Setup, such as channel settings. (p. 34)
[cc I
[Ezsyoc
[Powero,,,i.k 1
[Poweroo,i.k
[Aotopow0roo l
[Sidebar
[ Nosignal shut-off _ ]
[ Noaction shut-0ff _ 1
About I
[Reset 1
Adjustments/Configurations (alternatives)
Sets the mode to select the channel with Channel up/down button (Favorite/All)
Sets favorite channels. (p. 21 )
Displays Closed Caption. (p. 36-37)
Changes the station identifier. (p. 34-35)
Checks the signal strength if interference or freezing occurs on a digital image. (p. 34-35)
..-. "F
"OO
Pc
{:3..
C
"33
----:C
29
To Next Page
Loading...
