Panasonic TH-86CQ2U - Pjlink Protocol

45
English
PJLink security authentication
Use a password for PJLink security authentication.
Change the password first.
●
[All reset] settings will restore the password to the
factory default.
●
The maximum number of characters that can be used
for a password is 32 characters.
●
Recommended password
Number of characters: 8 to 32
Include at least 3 types of character from the following.
1) Alphabet uppercase character (A-Z)
2) Alphabet lowercase character (a-z)
3) Number (0-9)
4) Special character (~!@#$%&*()_+|{[}]<>.,/?')
When using without authentication, leave the password
blank.
Note
●
It is recommended that do not set the same password
as the current password or the same value as the
factory setting as the New password.
●
For PJLink specifications, visit the Japan Business
Machine and Information System Industries
Association (JBMIA) website:
http://pjlink.jbmia.or.jp/english/index.html
●
No member of the Panasonic Corporation or its
affiliate companies will ever ask directly for your
passwordnew
Never divulge your password should you ever receive
such a request.
PJLink protocol
The unit’s Network function is compatible with PJLink
Class 1. The following operations can be performed from
a computer when PJLink protocol is used.
●
Setting the Display
●
Querying the Display status
Supported commands
The commands to control the unit with PJLink protocol
are as follows.
Command Control
POWR Power control
0: Standby
1: Power On
POWR ? Power status query
0: Standby
1: Power On
INPT Input switch
*
Refer to INST? parameters.
INPT ? Input switch query
*
Refer to INST? parameters.
AVMT Shutter control
10: Picture On
(picture mute deactivated)
11: Picture Off
(picture on mute)
20: Audio On
(audio mute deactivated)
21: Audio Off
(audio on mute)
30: Shutter mode Off
(picture and audio mute
deactivated)
31: Shutter mode On
(picture and audio on mute)
AVMT ? Shutter control query
11: Picture Off (picture on mute)
21: Audio Off (audio on mute)
30: Shutter mode Off
(picture and audio mute
deactivated)
31: Shutter mode On
(picture and audio on mute)
ERST ? Error status query
First byte: 0
Second byte: 0
Third byte: Temperature. 0, 1, or 2.
●
Meaning of 0, 1 or 2.
0: Error is not detected,
1: Warning
2: Error
Fourth byte: 0
Fifth byte: 0
Sixth byte: 0