Panasonic TH-86CQ2U - Page 53

53
English
*
1: Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
*
2: Signals to represent formats are as follows.
R : D-sub RGB (PC IN)
H : HDMI (HDMI IN 1, HDMI IN 2, HDMI IN 3)
*
3: Based on VESA CVT-RB (Reduced Blanking) standard
*
4:Signalswith○inthePlugandPlay-supportedsignalcolumnaretheoneswritteninEDID(ExtendedDisplay
Identification Data) of this unit.
Forsignalswithout○inthePlugandPlay-supportedsignalcolumn,resolutionsmaynotbeselectedonthePC
side even if this unit supports those signals.
Note
●
An auto detected signal format may be differently displayed from the actual input signal.
●
[ i ] shown after the number of dots of resolution means the interlace signal.