TH-L24XM6Z
19
8 Measurements and Adjustments
8.1. Voltage chart of A-board
Set A-Board to a dummy set and check the satisfaction with the specified voltage as following table.
8.2. Voltage chart of P-board
Set P-Board to a dummy load and check the satisfaction with the specified voltage as following table.
Power Supply Name Measurement Point Specification
PNL12V TP4097 12.1V ± 0.8V
SUB3.3V TP5400 3.32V ± 0.165V
SUB1.1V TP8101 1.14V ± 0.07V
SUB1.5V TP8100 1.52V ± 0.05V
SUB5V TP5420 5.0V ± 0.25V
HDMI3.3V TP8000 3.3V ± 0.16V
Output Test point
Specification
Operate (Step 2) STBY (Step 1)
5.3V TP7501 5.3V ± 0.20V 5.3V ± 0.20V
16V TP7410/TP7411/TP7412 15.5V ± 0.8V -
24V TP7511/TP7512 24V ± 1.2V -
To Next Page
Loading...
