Using the Menu Functions
13
[Cinema]: Improves the performance of contrast,
black and colour reproduction for watching movies in a
darkened room.
[True Cinema]: Reproduces the original image quality
precisely without any revision.
[Custom]:
Allows you to customize the picture settings.
In each Viewing Mode, [Backlight], [Contrast],
[Brightness], [Colour], [Sharpness], [Tint], [Colour
Temperature], [Vivid Colour], [Adaptive Backlight
Control], [Ambient Sensor], [Noise Reduction] and
[MPEG Noise Reduction] can be adjusted and stored.
[Backlight], [Contrast], [Brightness],
[Colour], [Sharpness]
Increases or decreases the levels of these options
according to your personal preference
[Tint]
Adjusts the picture hue to suit your taste
For NTSC signal reception
[Colour Temperature]
Selects the colour temperature of the picture
[Cool2] / [Cool1] / [Normal] / [Warm1] / [Warm2]
[Vivid Colour]
Automatically adjusts colour for a more vivid picture
[On] / [Off]
[Adaptive Backlight Control]
Automatically controls luminance level according to the
images [On] / [Off]
[Ambient Sensor]
Automatically adjusts picture settings depending upon
ambient lighting conditions [On] / [Off]
[Noise Reduction]
Reduces unwanted picture noise [Auto] / [Max] / [Mid] /
[Min] / [Off]
[MPEG Noise Reduction]
Reduces unwanted MPEG block noise [Auto] / [Max] /
[Mid] / [Min] / [Off]
[Advanced Settings]
Available when you set [Viewing Mode] to [True Cinema]
or [Custom].
■ [Adaptive Gamma Control]
Automatically controls middle level of luminance
according to the images
■ [Black Expander]
Gradually adjusts the dark shades of the image
■ [White Balance]
Adjusts the white balance for red, green and blue
signals [R-/G-/B-Gain] / [R-/G-/B-Cutoff] / [Reset
White Balance]
■ [Colour Management]
Adjusts the hue, saturation and luminance [R-/G-/B-
Hue] / [R-/G-/B-Saturation] / [R-/G-/B-Luminance] /
[Reset Colour Management]
■ [Gamma]
[Gamma]: Switches the gamma curve [2.6] / [2.4] /
[2.2] / [2.0] / [1.8]
[Reset Gamma]: Resets to the default gamma
settings in this menu
■ [Reset Picture Defaults]
Resets to the default picture settings in this menu
[Option Settings]
■ [Film Cadence Mode]
Improves vertical resolution for movie images [On] /
[Off]
– This function is available for the interlaced signal.
■ [1080p Pixel Direct]
(For 39” & 50” models only)
Reproduces the original image quality in detail for
1080p (HDMI) input signal [On] / [Off]
■ [HDMI Content Type]
Adjusts the picture settings of each HDMI input
according to the selected content type [Graphics] /
[Photos] / [Auto] / [Off]
[Auto]: Automatically adjusts the picture settings
according to the received HDMI content if the
connected equipment supports HDMI Content Type.
– To set the availability of each content type for [Auto]
mode, select [Auto Detail Setting].
– For HDMI input.
■ [HDMI RGB Range]
Adjusts the black level of the image for each HDMI
input [Auto] / [Full] / [Normal]
– When the black level is not suitable, select [Full].
– For HDMI input.
■ [3D-COMB]
Makes still or slow motion pictures more vivid [On] /
[Off]
– Set to [On] to improve the colours in case patterning
occurs while viewing still or slow motion pictures.
– For PAL / NTSC signal reception in TV mode or from
composite.
[Screen Settings]
■ [16:9 Overscan]
Selects the screen area displaying the image for 16:9
aspect [On] / [Off]
[On]: Enlarges the image to hide its edges. Select
this if noise is generated on the edge of the screen.
[Off]: Displays the image in the original size.
– This function can be memorised separately for
SD (Standard definition) and HD (High definition)
signals.
■ [H-Size]
Switches over horizontal scanning size [H-Size1] /
[H-Size2]
■ [Zoom Adjustments]
Adjusts the vertical position and size when the aspect
is set to [Just] or [Zoom] mode
– [Just]: V-Size max is 3
– [Zoom]: V-Size max is 15
■ [Screen Display]
Turns off / on the TV screen without turning off the TV
[On] / [Off]
– The sound is active even if the screen turns off.
– Press any buttons (except Standby) to turn the
screen on.
[Copy Adjustment]
Copies picture adjustments to other inputs.
[Option Settings] and [Screen Settings] are not copied.
■ [Destination Viewing Mode]
Sets the viewing mode for the destination input [True
Cinema] / [Custom]
■ [Destination Input]
Selects the destination input
■ [Copy Start]
Select [Yes] to start copying
B6AZ.indd 13B6AZ.indd 13 2/1/2013 3:51:10 PM2/1/2013 3:51:10 PM
To Next Page
Loading...
