15
Attach the mounting nut and
adaptor.
安上螺帽和轉接器。
• The adaptor should be screwed on
straight. Screwing it on tilted may strip
the threads, resulting in water leaks.
• 要將轉接器垂直擰緊。斜著擰入的話，會
損壞其螺紋，造成漏水。
3
Attach the bypass selector and
tighten the mounting nut.
安上分水開關，然後緊固螺帽。
• Do not use any tools. (This may damage
the mounting nut.)
• 不必使用任何工具。 ( 這會損壞螺帽。)
4
Mounting nut
螺帽
Gasket
墊片
Adaptor
轉接器
Mounting nut
螺帽
Bypass selector
分水開關
ZGS0TKAS400EXZ.indb 15ZGS0TKAS400EXZ.indb 15 5/11/2010 3:28:43 PM5/11/2010 3:28:43 PM
To Next Page
Loading...
