Switching to the Tablet mode
A
Lift up the display so it stands perpendicular to the body.
B
Slide the display release latch (A), and rotate the display clockwise
until it clicks.
C
Close as the display faces up and fi x it using the latch (B).
This computer contains a magnet and magnetic products at the locations
circled in the illustration at right. Avoid leaving metallic object or magnetic me-
dia in contact with these areas.
Attaching the hand strap and the shoulder strap (option)
Attach the hand strap to any two of the corners (A) using the screws.
You can connect the shoulder strap (B) to the hand strap.
(The illustration is an example.)
CAUTION
Do not use the strap to carry a heavier weight than the computer. Other-
wise the strap may become loose by itself.
Do not use the strap if it becomes worn or damaged.
To Next Page
Loading...
