15
Getting Started
1 Select [start] - [Control Panel] - [User Accounts] - [Create a new account].
10
Create a new account.
When creating a new user account:
• If you make mail settings, create password reset disks (
page 18), or
conduct other related operations before creating the user account, you
will be unable to use any previous mail history or settings.
• When you create the first new account, you can only select [Computer
administrator].
Once a “Computer Administrator” account has been created, you can
create additional limited user accounts.
Note also that only the added user account will be displayed in the Wel-
come screen. The account for the administrator created during Windows
setup will not be displayed.
2 Enter a name for the new account, then select [Next].
3 Select [Computer administrator], then select [Create Account].
4 <When you want to create a password for the new account>
Select the new account you have created and select [Create a password].
Follow the instructions on the screen to create a password.
NOTE
9
<For MUI OS model>
Install the Adobe Reader
Adobe Reader is necessary to read the Important Tips and the Reference Manual,
which explains detailed operational procedures concerning your computer.
In [start] - [Run], input the following and select [OK].
English: [c:\util\reader\m\AdbeRdr70_enu_full.exe]
French: [c:\util\reader\f\AdbeRdr70_fra_full.exe]
German: [c:\util\reader\g\AdbeRdr70_deu_full.exe]
Italian: [c:\util\reader\t\AdbeRdr70_ita_full.exe]
Spanish: [c:\util\reader\p\AdbeRdr70_esp_full.exe]
Swedish: [c:\util\reader\s\AdbeRdr70_sve_full.exe]
Dutch: [c:\util\reader\nl\AdbeRdr70_nld_full.exe]
Finnish: [c:\util\reader\fi\AdbeRdr70_suo_full.exe]
Norwegian: [c:\util\reader\no\AdbeRdr70_nor_full.exe]
Install Adobe Reader by following the instructions on the screen.
NOTE
CAUTION
Remember this password! If the password is forgotten, Windows cannot be
operated.
You can create a password reset disk beforehand
( page 18).
5 Select [start] - [Turn Off Computer] - [Restart] to restart the computer.
8
Calibrate the touchscreen.
1 Select [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse] -
[TouchScreen] - [Calibration].
2 Touch the “+” mark on the calibration screen with the stylus (included) for about
one second.
3 After the calibration procedure is executed (e.g., after the nine “+” marks are
touched), the procedure ends when Enter is pressed.
4 Select [OK].
To Next Page
Loading...
