– SC3: PAL D, K / SECAM D, K
– F: SECAM L, L’
1. Select the channel position with Numeric buttons.
2. Select the channel with Channel Up / Down.
3. Set Manual Tuning.
4. Select Store and press OK to set.
●
Use Fine Tuning to make small adjustments to the tuning of an individual
programme (affected by weather conditions, etc.).
●
If a VCR is connected only with the RF cable, select channel position 0.
■ DVB-via-IP (DVB-S)
●
Please consult the received satellite broadcasting companies for the
setting.
1. Select Transponder Frequency / Symbol Rate / Polarisation / Modulation /
FEC / Service ID and set with Cursor buttons or Numeric buttons.
2. Select Start scan and press OK to search.
■ DVB-via-IP (DVB-C)
1. Select Frequency / Bandwidth / Modulation Type / Symbol Rate / FEC /
Service ID and set with Cursor buttons or Numeric buttons.
●
Normally set Symbol Rate to Auto.
2. Select Start scan and press OK to search.
- 99 -
To Next Page
Loading...
