●
The following items can be adjusted and stored for each mode.
Backlight / Contrast / Brightness / Colour / Tint / Sharpness / Colour
Temperature / Vivid Colour / Adaptive Backlight Control / Ambient Sensor
/ HDR Brightness Setting / Noise Reduction / MPEG Remaster / Dynamic
Range Remaster / Clear Motion
●
This function can be memorised respectively for input or TV mode.
■ To change the viewing mode with PICTURE
You can change the viewing mode easily only by pressing PICTURE.
1. Display Viewing Mode with PICTURE.
2. Select the mode and press OK to set.
●
You can also change the mode by pressing PICTURE.
(Press repeatedly until you reach the desired mode.)
●
To set the viewing mode selection
1) Display the menu with MENU.
2) Select Picture > PICTURE Button Setting and press OK to access.
3) Select the viewing mode to set.
- 58 -
To Next Page
Loading...
