2. Press BACK/RETURN and OK to store.
●
To exchange channel list (DVB-S)
1) Display the menu with MENU.
2) Select Setup > Other Settings > Exchange Channel List and press OK
to access.
3) Follow the on-screen instructions.
– During the operation, remove USB devices other than the USB Flash
Memory used for this function.
Settings > Setup > Other Settings
■ Skip unwanted Analogue channels
You can hide (skip) unwanted channels. The hidden channels cannot be
displayed except in this function.
1. Select Channel List and press OK to access.
2. Select a channel.
3. Press OK to set Reveal / Hide (skip).
: Reveal
: Hide (skip)
●
To reveal all channels (if available)
(yellow)
■ Edit Analogue Channels
●
To swap / move the channel position (if available)
1) Press
(green) to edit.
2) Set the new position with Cursor buttons and press
(green) to
store.
●
To retune each channel (Manual Tuning)
(red)
●
To rename the channel name
1) Press
(blue) to edit.
- 95 -
To Next Page
Loading...
